Having a dead battery is probably one of the most common problems for car owners. But like many basic car problems like a flat tire, it doesn’t require professional assistance. Having good jumper cables of high quality will get you on the road without ever thinking of calling a tow company. In this guide we will help you learn more about the best car jumper cables on the market. This information will point you in the right direction to buying your own jumper cables.
Types of Jumper Cables
i. Battery Boosters
The battery boosters provide you with enough energy to start your dead battery. But with this type, you only do it with one set of clamps. Just visualize them as portable batteries that are capable of charging a dead battery just like a working car can. This is so because the battery booster type of jumper cables don’t require another car to jump-start your battery. But because of their size, they usually take up a lot of space in your car.
ii. Smart Cables
Smart cables are a more advanced type of jumper cables. They have a built in unit that’s able to notify you if your cables are not connected properly. The stated unit is sometimes referred to as the reverse polarity indicator. This is because it chimes with a beep or tone when the cable is not properly connected. The dead batteries will not be able to charge if the jumper cables are not connected properly. Therefore, this model is very user for car owners who are not professional mechanics.
Key Features to Consider When Buying a Jumper Cable
1. Gauge of wire
This feature measures the amount of current the jumper cables is able to carry. The jumper cables are able to handle more current if the gauge number is low. This means that the gauge of wire must also be bigger in size.
2. Length of the cable
The length of the cable has a lot to do with the gauge of the wire and this is usually measured in feet. If the wire gauge is small, then your cable will belong. More current flow is easily handled in the one and two gauge wires. So the long cables are there to reduce the amount of heat created in the energy transfer. This long wire feature disperses the heat to protect cables, cars, and people from any harm.
3. Amperage of the jumper cable
Amperage is another factor to consider when describing an amount of power an electric current has. It is in your best interest going for a higher amperage jumper cable even if your jumper cable has enough amperage to jump start an average car. If the amperage of the jumper cable is high, then you will have more power to boost a dead battery.
4. Clamps of the cable
In the jumper cables business, there are two different types of clamps. Parrot clamps and alligator clamps. Parrot clamps are derived from the round shape of a bird’s beak and the alligator clamp resembles the long snout of an alligator with its boxy shape. In a variety of applications, both clamps work so well.
Best Heavy-Duty Jumper/Booster Cables
Are you stuck with a dead battery? The ABN Jumper Cables is a 25 feet long, 2 gauge booster cable that is safe for your commercial automotive ATV battery. The ABN Jumper Cables is a safe way to transfer power whenever you need a quick boost on your truck, car, van, SUV or a semi battery. The ABN Jumper Cables is a heavy duty 2 gauge cable which is 25 feet long for optimal reach. With the ABN Jumper Cables, you will never again worry about being stranded with a dead battery.
When travelling you should always be prepared, keep the ABN Jumper Cables in your trunk or car emergency kit so you can safely boost your vehicle whenever you need. The ABN Jumper Cables is also an easy to use product. The color identification of the cables helps to prevent crossing of wires. In this case the red is for the positive while the black is for negative. These ABN Jumper Cables are color coded to prevent crossing wires. They are also designed with easy to use handles for safe and secure clamping.
You can use the ABN Jumper Cables in any weather. The ABN Jumper Cables is a heavy duty cable constructed with solid copper clamps to administer optimal contact. The features of serrated jaws, high tension parrot clamps non slip rubber coating offers a secure connection grip. Besides, solid copper clamps the ABN Jumper Cables have low temperature resistance features. This feature help the ABN Jumper Cables administer optimal contact so you can get the job done right.
They are also designed to stand any weather. The ABN Jumper Cables is tangle free flexibility engineered for warm and cold climates. The PVC jacket is oil, chemical and water resistant.
Setup of The ABN Jumper Cables from the battery in the engine to the winch sled on the rear hitch is quite easy. You simply cut off the alligator clips and put on a high amp connector. You may not need to use the winch often, so having a hitch winch with extension cord is super nice. You can use the ABN Jumper Cables to power a 12000 pound winch with a 3 to 1 pulley reduction to pull a 40 foot high cube shipping container.
ROAD POWER 86660104 Jumper Cables
- 250% of power level
- 6 to 12 volt batteries
- T Prene jacket
The ROAD POWER 86660104 Jumper Cables is a heavy-duty booster cable that provides 250% of the power level. This level of power is provided by the 10 gauge feature of the booster cable. This makes the ROAD POWER 86660104 Jumper Cables ideal for SUVs and trucks. The ROAD POWER 86660104 Jumper Cables is designed to be used with 6-12 volt batteries. The ROAD POWER 86660104 features a triple polarity system. They are also color coated with a glow in dark labels. These features help to identify the negative and the positive cables.
The ROAD POWER 86660104 is also equipped with T Prene Jacket for protection. This feature is for water, chemical and temperature resistance. T Prene Jacket insulation ensures the highest level of user safety. It also assures dependability in the most extreme climate conditions.
The ROAD POWER 86660104 Jumper Cables is also ergonomically designed so that anyone can easily handle it. The ROAD POWER 86660104 does this by attaching itself firmly to both top and side post batteries. The ROAD POWER 86660104 Jumper Cables is also equipped with clamps that are triple polarity. The identification for the triple polarity includes color coding, indent stamping and glow in the dark labels.
Besides that, all energized clamp surfaces are shielded to avoid short circuits. All conductive clamp surfaces of the ROAD POWER 86660104 Jumper Cables are recessed to prevent accidental contact. The ROAD POWER 86660104 Jumper Cables has been equipped with T Prene Jacket insulation. This feature makes it remain flexible even under unfriendly climate. The T Prene Jacket insulation feature of the ROAD POWER 86660104 makes it oil, chemical and water resistant.
The ROAD POWER 86660104 Jumper Cables are designed to be heavy duty cables. This model is made using 4 gauge wires. This means that they perform best with any vehicle including cars, trucks or SUVs. This line of booster for the ROAD POWER 86660104 is UL listed and made in America. It also comes with a storage bag and offers a 1 year limited warranty.
Heavy Duty 12Ft 10 Gauge Booster Cables Power Jumper
- 10 gauge
- 12 feet long
- Rated 200 amps
- 12V batteries
The Heavy Duty 12Ft 10 Gauge Booster Cables Power Jumper is a tool every car should have. Having a jumper cable will allow you get back on the road if your car battery dies. The Heavy Duty 12Ft 10 Gauge Booster Cables are rated for up to 200 amps. It has been made from Copper Clad Aluminum/ rubber materials. They also have a thickness of 10 gauges. These features are protection when setting up. To easily connect to the battery, they are also made to be 12Ft long.
The Heavy Duty 12Ft 10 Gauge Booster Cables are easy to use. For your convenience and safety, there are instructions and warnings printed on the back of the carry case. The color identification of the Heavy Duty 12Ft 10 cables helps to prevent crossing of wires. Like any jumper cable, the red is for the positive while the black is for negative. These ABN Jumper Cables are color coded to prevent crossing wires. They are also designed with easy to use handles for safe and secure clamping.
The clamps for the Heavy Duty 12Ft 10 Gauge Booster Cables are ergonomically designed. They are distinctly color coded with shielded surfaces for safety. But on the downside, you are warned that it might not fit if you are using a tight spot. You are to be careful not to short out the leads as the bulk may make this difficult depending on the application. These jump leads are great for cars and light trucks.
The Heavy Duty 12Ft 10 Gauge Booster Cables are also designed to stand any climate. The Heavy Duty 12Ft 10 Gauge Booster Cables is tangle free flexibility engineered for warm and cold climates. This makes the Heavy Duty 12Ft 10 Gauge Booster Cables flexible in all weather conditions. This is made possible because of the PVC jacket. The PVC jacket is oil, chemical and water resistant.
XINCOL Heavy Duty 2500A Copper Wire Jumper Cable
- 1 AWG 100% copper wire
- TPR material
- 5.4 pounds of weight
This professional jumper cable was invented by Jack GOU, the founder of the XINCOL brand. The XINCOL Heavy Duty 2500A Copper Wire Jumper Cable is one of the most preferable choices of jumper cables on the market. It is equipped with 1AGW 100% copper wires. These wires are thick which makes them very good for conductivity.
The TPP material on the outside of the XINCOL Heavy Duty 2500A Copper Wire Jumper Cable makes them low temperature resistant of between -60 degrees Celsius to -105 degrees Celsius. They are also soft and flexible in extreme cold weather. This is made possible by the excellent heat insulation feature and the dual construction. They have extra strong grip heavy duty copper coated jaw clamps.
The XINCOL Heavy Duty 2500A Copper Wire Jumper Cable is suitable for all kind of 12V to 24V batteries. The excellent insulation and anti-frozen feature makes it withstand thermal change. The XINCOL Heavy Duty 2500A is also a versatile jumper cable. It is equipped with optimal variable length of 10 to 20 Feet designed to work in all-weather climates. This model is perfect for cars, motorcycles, trucks, vans and SUVs.
Basically there are 8 steps to take when jump starting your car using this cable. The first step is to make sure the two cars are switched off. The second step is to connect one end of the clamps to the positive post of the dead battery. The third step is to connect another end of red clamps to the negative post of the dead battery. On the fourth step you are required to connect one end of the black lamps to the negative post of the dead battery.
Connect another end of the black clamp to the negative post of the dead battery on the fifth step. On the sixth step you must step the working vehicle. On the seventh step you are required to wait 1 to 2 minutes and then start the dead vehicle. You are required to keep the vehicle running for a few minutes to recharge the battery. The eighth and final step is to disconnect the cable clamps in the reverse order.
DNA Motoring BBC-T1 Heavy Duty Jumper Cables
- 12V batteries jump starter
- Heavy duty
Often time’s people think jump-starting a car is an easy task, but it may be very daunting. The professional technicians of DNA do heavy research and development in testing car jump cables. The DNA Motoring BBC-T1 Heavy-Duty power jumper features 10 gauge 12 feet which are rated for up to 200AMPs. The thickness of the cables is 10 gauges. It is also designed with Copper Clad Aluminum/ Rubber. This feature provides user safety when installing.
For easy setup they come with printed warnings and instructions on the back of the carry bag. This is for your convenience and safety. The DNA Motoring BBC-T1 Heavy Duty is also designed with red and black cables. Red represents a positive while black represents negative for easier identification. The 12 feet feature makes it possible to jump start your battery without being very close to your car.
The fact that the gauging power of the DNA Motoring BBC-T1 Heavy Duty is rated up to 200Amps, it can work on light trucks. So you don’t need to worry about a dead battery on the road when you have this model in your car emergency box.
Like most jump starters, the DNA Motoring BBC-T1 Heavy Duty has clamps that are ergonomically designed. They are distinctly color coded and there surfaces are also shielded for safety. This means that you can easily jump start your car battery without ever worrying on how to handle the jump starter.
The energized clamp surfaces of the DNA Motoring BBC-T1 Heavy Duty are shielded to avoid short circuits. All conductive clamp surfaces of the DNA Motoring BBC-T1 Heavy Duty are recessed to prevent accidental contact. This feature of the DNA Motoring BBC-T1 Heavy Duty remains flexible even under the severest temperatures.
And to administer optimal contact, the DNA Motoring BBC-T1 Heavy Duty is constructed with solid copper clamps. The solid copper clamps have low temperature resistance features. This feature help the DNA Motoring BBC-T1 Heavy Duty administer optimal contact.
The mission of IMBAPrice Company is providing users with the ultimate audio and networking transfer mediums. And the IMBAPrice Jump Starter Cable is a high quality energy transfer product with a high performance from the company.This feature allows for cleaner and safer installation. Every car must have this important safety and security accessory.
The IMBAPrice Jump Starter Cable also has a quite easy setup. You set it up from the battery in the engine to the winch sled on the rear hitch. This is done by simply cutting off the alligator clips and put on a high amp connector. Having a hitch winch with extension cord is super nice because you may not need to use the winch often.
The IMBAPrice Jump Starter Cable is fully equipped copper and heavy metal coated plugs. With this feature you will not have to worry about rusting or losing its quality. The copper wire is flexible and it is accompanied with a PVC jacket. The PVC jacket is oil, chemical and water resistant. With this feature it is able to withstand unfriendly weather climates.
The IMBAPrice Jump Starter Cable is also equipped with medium duty copper plated steel clamps. This makes it a good jump starter for high conductivity. By this you will avoid being stranded on the road or waiting for a tow truck. This model is professionally constructed sturdy which is made of high quality material. The high quality material of the IMBAPrice Jump Starter Cable ensures the long service life with extended reliability. It is also designed to perfectly fit for any different shapes of the batteries.
The IMBAPrice Jump Starter Cable is especially suitable for the length between the good vehicle and the dead vehicle. It is also a temperature resistant cable. The IMBAPrice Jump Starter Cable can remain flexible even in temperatures as low as -40 degrees F. this makes it a perfect choice for your battery in extreme weather conditions. You can even use the IMBAPrice Jump Starter Cable to power a 12000 pound winch with a 3 to 1 pulley reduction to pull a 40 foot high cube shipping container.
Q. Does The Color Of The Jumper Cable Really Matter?
A. Jumper cables can be designed in many colors. But as a user, your attention must be focused on which color is the negative and which color is the positive. You might cause a short circuit if you can’t differentiate the colors for the two.
Q. Where Do I Attach The Corresponding Clamp If My Car Battery Doesn’t Have A Negative Terminal?
A. this scenario is common. The connection needs to be grounded by the negative clamp. So if you attach it to bare metal anywhere in the engine bay it will work perfectly fine. But keep in mind that the connection is firm to avoid the slipping of the clamp.
Q. Where Do I Place The Car Jumper Cables?
A. a typical battery is designed with two terminals on the top of their case. You will see a positive cap in red on the positive post. Be sure to check which terminal is negative and which one is positive. Connect the corresponding colors of the jump cable with the battery terminals.
We recommend you to purchase the DNA Motoring BBC-T1 and Heavy Duty 12Ft 10 Gauge Booster if you own a big car because these jumper cables carry more electric current through them which will make it easier for you to jump start your light truck. And for the smaller car batteries we recommend the ABN Jumper Cables and the IMBAPrice Jump Starter Cables